With more and more vape pals holding vapors, it's no doubt to say that the Geek Bar Pulse has stood out in the clouds. Its unique design, user-friendly features and excellent flavors make it a top picker among adult vapers.

However, like any device, it's not immune to issues.  We've seen some users encounter problems such as the dreaded red blinking light, the device failing to produce vapor, the device not hitting, or charging difficulties.

So, how to fix the Geek Bar Pulse issues? This guide will show you some common issues and provide solutions to keep your device running smoothly.  Let's delve into it!

Quick Look: 

• Part 1: An Overview of Geek Bar Pulse
• Part 2: Common Issues You Will Meet with Your Geek Bar Pulse
• Part 3: Solutions for Unresolved Issues After Troubleshooting
• Part 4: Maintenance Tips for Your Geek Bar Pulse 

Part 1: An Overview of Geek Bar Pulse

The Geek Bar Pulse disposable vape is the first mod-like disposable vape, like the cool, new kid on the block in the vaping world. Let's break down what makes this vape tick and how you can keep it running smoothly. 

• It's Smart When You Puff: No buttons are needed here, this vape wakes up and gets to work the moment you take a draw.
• Screen Time: It has a full-screen display showing how much battery and juice you've left, with some cool space-themed animations.
• Double the Fun with Coils: Inside, it's got dual mesh coils. This means you can switch between a smooth, gentle vape or a more powerful one, depending on what you're in the mood for. 
• Choose Your Adventure with Modes: You've got two modes to play with. Regular Mode is perfect for a steady experience. And Pulse Mode turns things up a notch, giving you bigger clouds and a stronger hit, but with half the puffs. 
• Airflow Magic: This vape lets you switch between the two modes by just changing the airflow. It's like having a customizable vape experience at your fingertips.
•  No Dead Battery Blues: It's rechargeable with a USB Type-C port.

Part 2: Common Issues You Will Meet with Your Geek Bar Pulse

To fix your Geek Bar Pulse, it is essential to identify the problem with your Geek Bar Pulse first. Here I will list the most common issues for you and give you a detailed guide to fix them.

1. Geek Bar Pulse Not Hitting

One of the most common issues is that the Geek Bar Pulse is not hitting. If your Geek Bar Pulse isn't hitting, it's signaling that there's a hiccup in its performance. This issue can stem from several factors, including low battery, connection problems, worn-out coils, and more. To resolve these issues, you can simply recharge the battery, check the connections, etc,. Here's a detailed explanation for you to fix Geek Bar Pulse not hitting: 

Common Reasons:

• Battery Issues: If the battery is low or not properly connected, the Geek Bar Pulse might fail to hit. It needs enough power to heat the e-liquid into vapor.
• Pod Connection Problems: The connection between the pod and the battery is crucial. If this connection is loose or obstructed by debris, it can prevent the device from hitting.
• Clogged Airflow: Over time, dust or e-liquid residue can clog the device's airflow, restricting the necessary air intake for vapor production.
• Worn-out Coils: The coil inside the pod heats the e-liquid. If the coil is worn out or damaged, it might not heat the e-liquid effectively, resulting in no hit.

To resolve the issues, here are the solutions:

• Recharge the Battery: Make sure your Geek Bar Pulse is fully charged. A simple recharge might be all you need to get back to vaping.
• Inspect and Clean Connections: Check the connection points between the pod and the battery. Clean any dirt or residue to ensure a good connection.
• Clear the Airflow: Look for any blockages in the airflow system and clean them out. This can usually be done with a small brush or a gentle blow.
• Replace the Pod: If the coil is the issue, you might need a new geek bar.

 2. Geek Bar Pulse Flashing Red

If your Geek Bar is blinking red, it's trying to tell you something's not quite right. This red light is a common way for vapes to communicate issues, and in the case of the Geek Bar Pulse, here are a few reasons why this might be happening:

Common Reasons:

• Low Battery: The most common reason for a red flashing light is a low battery. To solve this problem, just charge it.
• Connection Issues: Sometimes, the problem could be with the connection between the battery and the pod. If there's a bit of dirt or the connection's not quite right, your device might flash red as a warning.
• Sensor Problems: The Pulse vape has smart sensors that activate when you take a puff. If these sensors get stuck or malfunction, they might send out a red flashing signal.

Possible solutions to fix it:

• Charge It Up: First things first, give your device a good charge using its USB Type-C cable. If the battery is the issue, this should fix it. 
• Check the Connections: Make sure everything's clean and connected properly. A quick wipe or blowing into the airflow might be all it takes. 
• Reset the Device: If it's a sensor glitch, try turning the device off and on again and adjusting the airflow setting to reset.
• Gentle Fix: Some unconventional methods users have found effective include gently smacking the device on your knee, tossing it on the blanket, or just dropping it on your floor. While it's not a guaranteed fix, it's a less invasive way to possibly unstick a sensor.

3. Geek Bar Pulse Not Charging

If your Geek Bar Pulse is not charging, it can be frustrating, especially when you're looking forward to a vaping session. Several factors can contribute to charging issues, ranging from simple fixes to more complex hardware problems. Here’s a closer look at why this might be happening and how you can fix your Geek Bar Pulse: 

Common Causes: 

• Faulty Cable or Charger: The USB Type-C cable or the power source you're using might need to be fixed or compatible with your device. 
• Dirty or Damaged Charging Port: Over time, the charging port can accumulate dirt or suffer damage, hindering the connection between your device and the charger. 
• Battery Issues: The internal battery could be at the end of its lifecycle, especially if the device has been used extensively over a long period. 
• Internal Damage: Dropping your device or exposing it to liquids can cause internal damage, affecting its ability to charge properly.

Solutions: 

• Try a Different Cable or Charger: Use a different USB Type-C cable and power source to rule out the possibility of a faulty cable or charger. 
• Clean the Charging Port: Gently clean the charging port with a small, soft brush or canned air to remove any debris that might be blocking the connection. 
• Check for Physical Damage: Inspect your device for any signs of physical damage, especially around the charging port, which might indicate why it’s not charging. 

4. Geek Bar Pulse Hit Intermittently

If your Geek Bar Pulse is hitting intermittently, it means the device is working unpredictably, delivering vapor sometimes and failing at other times. This inconsistency can be frustrating, but it's often a sign of specific issues that can be addressed. Here are some common reasons behind intermittent hitting and what you can do about them: 

Common Reasons: 

• Battery Connection Issues: If the battery's connection to the device is loose or inconsistent, it can lead to intermittent hitting. This might happen if the device has been dropped or handled roughly.
• Dry Coil: If the vape coil is not fully soaked, it may lead to sporadic performance.
• Clogged Airflow: A blockage in the device's airflow can restrict the necessary air intake for vapor production, causing the device to hit inconsistently.
• Faulty Sensor: The draw-activated sensor in your Geek Bar might be malfunctioning, leading to intermittent detection of your draw.

Solutions:   

• Check and Clean the Battery Connection: Ensure the battery is properly connected and clean any dirt or debris from the connection points. A cotton swab lightly dampened with alcohol can be used for cleaning. 
• Upside down the device: this action makes the coil fully drenched, making the hitting consistent.
• Clear the Airflow: Inspect the device for any blockages and carefully clean the airflow paths. Sometimes, a simple blow through the device can dislodge debris.
• Reset the Device: Try resetting the device. For many vapes, this can involve simple steps like removing the pod and reinserting it or turning the device off and on again if it has a power button.  

5. Geek Bar Pulse Produces Less Vapor

When your Geek Bar Pulse starts producing less vapor than usual, it can affect the overall satisfaction of your vaping experience. This issue can arise from a few different areas, but thankfully, most can be addressed with simple troubleshooting steps. Here's what could be causing the decrease in vapor production and how you can fix it:

Common Reasons:  

• Low Battery Power: Insufficient battery power means the device can't heat the e-liquid effectively, resulting in less vapor. 
• E-Liquid Level: If your Geek Bar Pulse screen shows low on e-liquid, it won't be able to produce as much vapor. This is especially relevant for disposable vapes, which cannot be refilled. 
• Clogged Airflow: A blocked airflow system can restrict the amount of air that is drawn through the device, essential for vaporizing the e-liquid properly.
• Coil Degradation: Over time, the heating element (coil) in the vape can wear out, leading to less efficient vapor production.

Solutions :

• Recharge the Device: Ensure the Geek Bar Pulse display shows 100% battery status. A fully charged battery provides the necessary power for optimal vapor production. 
• Replace if Necessary: if it's low on e-liquid, it could indicate that it's nearly time to replace the device.
• Clean the Airflow Vents: Check the airflow vents for any blockages and clean them gently. This can restore airflow and improve vapor production. 
• Device Limitations: If you've used it for an extended period, the decrease in vapor could be a sign that the device has reached the end of its usable life.

6. Geek Bar Pulse is Leaking E-Liquid

Leaking e-liquid from your Geek Bar Pulse can be a nuisance, potentially messy, and can diminish the quality of your vaping experience.  

Common Causes: 

• Improper Storage: Storing your device in the wrong position or under extreme temperatures can cause the e-liquid to leak.
• Loose or Damaged Seals: Over time, the seals and connections within your device can become loose or wear out, allowing e-liquid to escape. 
• Frequent Usage: Constant use can heat the device and thin the e-liquid, making it more prone to leaking through small gaps.

Solutions: 

• Correct Storage: Always store your Geek Bar Pulse upright and avoid leaving it in environments that are too hot or too cold. Extreme temperatures can affect the viscosity of the e-liquid and pressure inside the device, leading to leaks.
• Use Properly: Giving your device a break between uses can help prevent overheating and reduce the likelihood of leaks caused by thinned e-liquid. 

Part 3: Unresolved Issues After Troubleshooting

After going through all the recommended troubleshooting steps for your Geek Bar Pulse, if your device is still not working, it can be quite disheartening. Here are some additional tips for you to resolve the problems:

Next Steps:

• Consult the User Manual: Sometimes, the solution requires specific instructions provided in the user manual.
• Contact Geekvape Customer Support: Reaching out to Geekvape's customer service can provide you with expert advice tailored to your specific issue.
• Check Warranty Coverage: If your Geek Bar Pulse is still under warranty, verify the terms and conditions. Manufacturers often replace or repair devices that malfunction due to manufacturing defects at no extra cost.
• Seek Professional Help: For physical stores or online forums dedicated to vaping, professionals and experienced vapers can offer insights and possibly identify and resolve issues that could be more obvious to most users.
• Avoid Unauthorized Repairs: While it might be tempting to attempt more invasive fixes, opening up your device or tampering with its internals can void warranties and potentially cause harm. 
• Consider a Replacement: If your Geek Bar Pulse is out of warranty and the issue remains unsolvable, it may be more cost-effective and safer to replace the device. Continuing to use a malfunctioning vape can pose safety risks.

Safety Reminder: 

Vaping devices, especially when malfunctioning, should be handled with care due to the risk of battery failures and other hazards. Always prioritize safety, both in how you attempt to fix issues and in deciding when it's time to stop using a problematic device. 

Facing unresolved issues with a vaping device like the Geek Bar Pulse can be frustrating, but by taking the appropriate steps, you can ensure that you're making informed decisions about how to proceed, prioritizing both your vaping experience and safety. 

Part 4: Maintenance Tips for Your Geek Bar Pulse

To maintain your Geek Bar Pulse, here are some tips for you:

1. Keep It Charged: Make sure to charge it with the USB Type-C cable it comes with. A happy vape is a charged vape. 
2. Clean the Mouthpiece: Sometimes, a little gunk can get in the way. A quick cleanup can make all the difference.  
3. Check the Screen: If the screen shows you're running low on juice or battery, it's time to refill or recharge. 
4. Switch Modes Wisely: If you're looking for a longer-lasting vape session, stick to Regular Mode. Feeling adventurous? Pulse Mode is where it's at, but remember, it will use up juice and battery faster. 
5. Got Leaks? Stand It Upright: If you notice any leaking, make sure you're storing your vape upright. And keep it away from extreme temperatures. 
6. Trouble? Don't Hit It: Unlike some old-school fixes, smacking your vape isn't the way to go. If you're having trouble, try the basics first — check it's charged, clean, and properly assembled.

Other Articles about Geek Bar: 

• 12 Best Geek Bar Pulse Flavors To Try
• How To Estimate When Your Disposable Vape Is Getting Empty?
• Geek Bar Pulse Vs. Raz TN9000: Disposable Vape Showdown!
• Geek Bar Pulse Review: 2025'S Hottest Disposable Vape
• Geek Bar Pulse Vs. Flum Pebble: Which One Should You Choose?
• Why Does My Geek Bar Pulse Taste Burnt?
• How To Spot A Fake Geek Bar Pulse?
• Why Does My Geek Bar Pulse Show 0% Yet Still Work?